UV flatbed printer platform
The uv flatbed printer platform is a supporting plane for materials in the working state of the machine. The suction function contained in the suction platform can effectively provide a flat printing environment. The suction platform is an aluminum alloy platform with a honeycomb hole for placing substrates. The quality of the platform depends on the load-bearing capacity, flatness and adsorption.
The size of this platform is 2.5m * 1.6m, which is made of aluminum alloy, 3 cm thick, and can bear a weight of about 500 kg. The advantages of the platform are high flatness, the maximum error is within 10 wires, and the load bearing capacity is high. There is a hole every 2 cm in the middle of the platform, so the platform has good adsorption performance.
The steel frame at the bottom of the UV flatbed printer platform is milled by a gantry. After the platform cooperates with the steel frame, the flatness of the equipment will be very high, which will play a good role in printing accuracy and printing results.
have to be aware of is:
1. During the long-term use of the platform, if the surface is not covered with a protective film, the surface will be easily dirty. For cleaning, use alcohol or plastic spatula. Avoid using a steel scraper to hang the surface of the device, which will cause the platform surface to be uneven.
2. When placing substrates on the surface of the platform, do not throw them around. The edges and corners of the material are especially metal materials. If you do not pay attention, it may cause small pits on the surface. In addition to metal suction platforms, UV flatbed printers also have a glass platform, which belongs to the early platforms in the industry. There are few now, and most of them are metal suction platforms. If you meet a glass platform, it is basically a modified equipment.