UV flatbed printer disc filter

       uv Flat-panel printer dish-shaped filter, with one input and one output on each end, regardless of the front and back, the way to install it is directly tightened with a needle-nose pliers, the main role is to filter ink impurities.

UV flatbed printer disc filter

       The dish filter is an indispensable device on the uv ink pipeline. It is usually installed below the main board of the printhead and links the secondary ink cartridge and printhead components at the bottom. After the filter cartridge of the dish filter has a filter, its impurities are blocked. When cleaning is required, as long as the detachable filter cartridge is removed, it can be reinstalled after processing, so it is extremely convenient to use and maintain.

       Dish filter performance parameters:

       Diameter: 4.5 cm

       Filtration accuracy: 5U

       Features: Ultra-fine filtration, suitable for UV printers, universal printers, using a variety of ink, solvent, water-based and UV ink machines to filter impurities to protect the nozzle and extend the life of the nozzle. In order to better protect the UV flatbed printer nozzle, it is recommended to replace it every six months to achieve the best results.

       Dish filter maintenance

       1. The core of the dish filter is the filter element. The filter element is made of special materials, which is suitable for damage and needs special protection;

       2, when the dish filter works for a period of time, the filter element traps a certain amount of impurities. At this time, the pressure drop increases and the flow rate will decrease. The impurities in the filter must be removed in time, and the filter element must be cleaned at the same time.

       3. When removing impurities, pay special attention to the precision filter element, which must not be deformed or damaged, otherwise, the filter element can be installed again, and the purity of the medium after filtering cannot meet the design requirements;

       4, disc filter element, can not be used repeatedly many times;

       5. If the filter element is found to be deformed or damaged, it needs to be replaced immediately.

       When choosing a dish filter, consider the following:

       ⑴ Filtration accuracy should meet predetermined requirements.

       ⑵Can maintain sufficient flow capacity for a long time.

       ⑶The filter element has sufficient strength and is not damaged by the action of hydraulic pressure.

       ⑷The filter element has good anti-corrosion performance and can work permanently under the specified temperature.

       ⑸ Easy to clean or replace the filter element.

Processed in 0.009610 Second.