UV flatbed printer protection bottle ink solution

         The ink in the protective bottle of the UV flatbed printer will directly lead to the inability to supply ink, and the print head will not be able to print the pattern normally. The occurrence of this kind of failure is generally caused by the negative pressure adjustment being too low to cause back suction, the secondary ink cartridge sensor is abnormal, and the ink supply circuit is abnormal.

UV flatbed printer protection bottle ink solution

        1. Negative pressure adjusts negative pressure to cause back suction

If the negative pressure value of the ink supply is too low, it will cause the UV ink to suck back. At this time, the ink will not be smoothly supplied to the nozzle. At this time, only the negative pressure value needs to be adjusted to return to normal. There is adjustment on the software. . If it is manual, it needs to be adjusted manually. It should be noted that the normal value of the negative pressure of different models of UV flatbed printers is different, and there is no same range.

        2.The secondary ink cartridge sensor is abnormal.

        The headphone cartridge sensor of the uv flatbed printer is abnormal. You need to check whether the secondary cartridge sensor is sinking. If it is sinking, just bring it up. If it is repeatedly raised and sinks, it means that it is broken and you need to replace it with a new secondary ink cartridge.

       3.Ink supply circuit is abnormal

       Check the ink supply circuit of the UV flatbed printer if the voltage is suddenly high or low or the circuit is burnt out and short-circuited. If the above faults exist, after the device is shut down, repair the circuit.

cache
Processed in 0.004699 Second.