Introduction of microcrystalline composite technology for UV printing tile background wall

         UV crystal tile background wall microcrystalline composite technology is introduced. With its unique technology and beautiful luster, microcrystalline composite technology attracts a large number of home improvement enthusiasts. It has also become the most common printing process in tile background walls, so what is the flow of the microcrystalline composite process?

Introduction of microcrystalline composite technology for UV printing tile background wall

       First use a UV printer to print on the back of the glass, then paste the printed glass on the surface of the tile through a film, and then put it into the laminating furnace for vacuum and high temperature compounding. After high temperature, use the glass edger to grind ! A beautiful finished product!

       But many friends often encounter microcrystalline composite process glass cracks when doing microcrystalline composite, so why is this?

I. Glass breaks out of the oven

       Answer:

       1, the flatness of the tile is insufficient

       During the lamination process, the whole process is evacuated, so that the glass and the tiles are 100% bonded together, the flatness of the tiles is not enough, the glass is forced to bend and fit the tiles, which makes the glass subject to uneven forces and easy to break!

      2. In addition, the microcrystalline composite should use a laminating furnace, not an autoclave or a laminator. The high strength pressure of these two devices will directly crush the glass!

2. The glass breaks for a period of time after paving

     Answer:

Insufficient flatness of tiles

In the case of insufficient flatness of the tile, the glass has been under uneven force, and it is only a matter of time before the glass breaks!

3, punching, cutting and breaking

      Answer: Microcrystalline composite products must be punched with circular holes at the four end points, and the cutting process must not be short of water. Any direct cutting or dry cutting will inevitably break the glass.

      If you want to do tile background wall printing business, if the initial budget is not large, you can start with only one UV printer equipment for printing, but it is still recommended to purchase supporting equipment, such as laminator, engraving machine, sandblasting machine, Spray coating machine and so on, to better make the complete set of tile background wall craft.


cache
Processed in 0.008474 Second.